Home > Sundries and Valves
Sort By:
1
Clamp for hoses on Caskerator Clamp

#40403 Clamps - Hose clamp for the caskerator kit. 4 are required.


Our Price: $0.95
John Guest Push Fitting 1/2" stem - 3/8" straight John Guest Push Fitting 1/2" stem - 3/8" straight

#24800 John Guest Push Fitting 1/2" stem - 3/8" straight. The one to use with 3/8" ID hose. An easy way to connect beer hose to the inlet valve of your Angram beer engine.

Our Price: $5.75
John Guest Push Fitting 1/2" Stem - 1/2" elbow John Guest Push Fitting 1/2" stem - 1/2" elbow

#24801 John Guest Push Fitting 1/2" stem - 1/2" elbow. The one to use with 1/2” ID hose. An easy way to connect beer hose to the inlet valve of your Angram beer engine.

Our Price: $5.75
Hose for Caskerator Hose for Caskerator (4' length)

#40401 Hose for Caskerator (4' lengths) - 2 are needed


Our Price: $6.00
Male Non-valved Quick Disconnect Male Non-valved Quick Disconnect

#40330 Male Non-valved Quick Disconnect. Used on the beer line. Connects to the Female Valved Quick Disconnect and makes changing cask widges so much easier. No more undoing hose clamps.

The complete kit is available with $10 savings

Our Price: $11.95
Pump clip blank Pump Clip

#40087 Pump Clip
Easily change the beer information; label just slides in. Attaches to handpump with two screws which are included with instructions.

Our Price: $15.95
Race cask ventilator Race cask ventilator

#11045 An automatic hard and soft spile that can be used AFTER the cask has been properly vented. Only allows air to enter the cask when beer is dispensed otherwise the cask is sealed. The advantage is that it alleviates the need for hard spiling at the end of a session and extends the life of the beer by another day or so. Will allow excess gas to escape if pressure builds. Reusable.

Our Price: $17.95
Male Valved Quick Disconnect Male Valved Quick Disconnect

#40320 Male Valved Quick Disconnect. Used on gas line coming from a cask breather and connects to the Female Valved Quick Disconnect. This unit is valved so when disconnected shuts off automatically. Together with the female valved quick disconnect, makes changing cask widges so much easier. No more undoing hose clamps.

The complete kit is available with $10 savings.

Our Price: $19.95
CAMRA "Cellarmanship" CAMRA "Cellarmanship"

#40075 CAMRA "Cellarmanship"
The definitive guide for handling cask ale. A must buy for burgeoning cellarmen or women.

Our Price: $24.25
Female Valved Quick Disconnect Female Valved Quick Disconnect

#40310 Female Valved Quick Disconnect. Used on the cask widge beer and gas line. This unit is valved so when disconnected shuts off automatically. Together with the male valved and male non-valved make changing cask widges so much easier. No more undoing hose clamps.

The complete kit is available with $10 savings

Our Price: $24.95
ALL Beer Guide ALL BEER Guide Book

#40077 ALL Beer Guide Book
'A'les, 'L'ager and 'L'ambics: the 3 beer families. Complete beer education. Award-winning and considered "World's Best Beer Book" (Gourmand, 2010). Divided into six sections easy to use and read: styles, brewing, experience, flavours, skills, and answers. By master brewer Alex Barlow who has 26 years of experience in brewing, trade quality, sales and marketing and a true love of beer.

List Price: $24.95
Our Price: $24.95
Cask Breather Spigot Cask Breather Spigot

#11072 Used with the cask breather to attach gas line to the firkin through the shive bung. Should be threaded in not hammered.

Our Price: $27.50
Blackboard Pump Clip Blackboard Pump Clip

#40080 Blackboard Pump Clip

Our Price: $29.25
Blackboard for Ins. Jacket Blackboard for Insulated Jacket (ONLY for blue firkin jacket)

#30070 Blackboard for Insulated Jacket
Excellent promotion for changing beers. Use coloured chalk pens to great effect. Laminate black board, durable and fully washable. Fastens to Insulating Jackets by means of press studs (all standard Jackets above 9 gallon size are press studded to suit).

Our Price: $36.50
Kilderkin Spring for Autotilt Stillage Pair Kilderkin Springs for Autotilt Stillage (pair)

#33055 Kilderkin Springs for Autotilt Stillage (pair)
Replacement springs (pair) for autotilt stillage.

Our Price: $38.45
Non-return Valve Non-return Valve

#40050 Non-return Valve

Our Price: $38.50
Wooden Stillage Wooden Stillage

#40090 Wooden Stillage suitable for firkins or pins.

Our Price: $39.50
Shive Extractor Bar Shive Extractor Bar

#11090 Tool for removing shives from casks after use. Worth its weight in gold. Can also be used for keystones. Watch our "Tools of the Trade - Ash Mallet and Shive Extractor Bar" video to learn proper technique for this very useful tool.

Our Price: $42.50
Ash Mallet w/ heavy duty shaft Ash Mallet w/ heavy duty shaft

#40010 Ash Mallet with heavy duty shaft. Much better than rubber for knocking in spiles and taps. Watch our "Tools of the Trade - Ash Mallet and Shive Extractor Bar" video to learn proper technique for the mallet.

Our Price: $44.50
Brass Effect Drip Tray Brass Effect Drip Tray

#51010 Our imported brass effect drip trays are perfect to sit the glass on before serving the customer, ensuring that all spillage is absorbed. A standard in British pubs for years. Dimensions: 16" by 8 3/4"

Our Price: $44.95
Firkin Spring for Autotilt Stillage Pair Firkin Springs for Autotilt Stillage (pair)

#33052 Firkin Springs for Autotilt Stillage (pair)
Replacement springs (pair) for autotilt (9-11 gallon size) stillage.

Our Price: $45.00
Copper Drip Tray Copper Drip Tray

#30080 Copper Drip Tray
Traditional 6" copper drip bowl on brass chain and yoke. Perfect accessory for cask ales on the bar.

Our Price: $54.40
Check Valve Check Valve

#40040 Check Valve
Stops beer running through the beer engine if there is pressure on the beer i.e. the firkin is higher than the beer engine or a flojet gas pump is used for long runs.

Our Price: $67.75
Quick Disconnect Kit Quick Disconnect Kit

#40340 Quick Disconnect Kit.:
Used on the cask widge beer and gas line. The female units are valved so when disconnected shuts off automatically. Together with the male valved and non-valved quick disconnects, makes changing cask widges so much easier. No more undoing hose clamps.

The kit includes the following quick disconnects:
2 female valved (one for the beer line and one for the cask breather/soft spile line)
1 male valved (one for the cask breather line)
2 male non-valved (one for the beer line and one for the soft spile).


This complete kit is a $10 savings over purchasing items separately.

Our Price: $83.75
Cask Breather Cask Breather

#40030 Cask Breather
Utilised to extend the life of cask ale by replacing the head space with CO2 at atmospheric pressure. Just attach in line from your CO2 regulator which should be set at about 5 psi. The cask breather can be used for multiple casks.
NOTE: If dispensing a cask in the traditional way i.e. horizontally, you will require the cask breather spigot 11072. If using with the cask widge i.e. vertically. the spigot is not needed.
NOTE2: If using a cask breather with gravity dispense, as the volume of beer diminishes so will the flow rate to the point that it will stop before the cask is empty. At this point we suggest connecting the CO2 directly to the breather spigot with the lowest pressure possible.

Our Price: $84.50
Platform for Caskerator Platform for Caskerator

#40410 Platform for Caskerator. Attach engine and kegerator with this specially designed platform. Part of the Caskerator Kit.

For dimensions of the platform and plinth, click here.

Our Price: $150.00
Autotilt Stillage Autotilt Stillage

#33050 Autotilt Stillage
All purpose autotilting stillage for use with cask sizes 9 to 11 gallons. Unique five coil springs for smooth lift every time. Lifetime mechanical warranty (which even covers the springs). The most versatile cask handling system available. 18 gallons (kilderkin) springs available. To see the autotilt in action click here.

Our Price: $212.50
   
 
1