Sundries
Cask Breather with Spigot
Utilised to extend the life of cask ale by replacing the head space with CO2 at atmospheric pressure. Just attach in line from your CO2 regulator which should be set at about 5 psi. Comes with spigot to attach to shive bung in cask. The cask breather can be used for multiple casks, additional spigots will be required.
$88.50
Cask Breather Spigot
Screws into shive bung for connecting cask breather to cask.
$18.45
Angram Sparkler
Standard thread - fits all beer engines
$4.50
Ash Mallet
Much better than rubber for knocking in spiles and taps.
$44.50
Cask Tap, Nut and Hose Tail
Cask Tap
Standard gate valve cask tap available for both L and 3/4" thread.
$19.15
Available for L, 3/4" and Y threads.
$2.35
Cask Tap Tail
Available for L, 3/4" and Y threads.
$2.35
Strains any bits of hops that find their way to the tap. In addition, the rubber seat that the screen is mounted acts as a washer between the nut and tail. For $1.00 should accompany every tap.
$1.00
Wooden Shive and Keystone Bungs for Casks
Plastic Shive and Keystone Bungs for Casks
25 quantity - $0.89 each
50 quantity - $0.63 each
100 quantity - $0.45 each
25 quantity - $0.50 each
50 quantity - $0.40 each
100 quantity - $0.32 each
Plastic Shives for Plastic Firkins
25 quantity - $0.98
50 quantity - $0.74
100 quantity - $0.54
Plastic Keystones for Plastic Firkins
25 quantity - $0.95
50 quantity - $0.67
100 quantity - $0.47
Threaded Shive
Shive used in the “Green Cask” plastic firkins. Shown with free spanner for tightening.
25 - $0.98 each
50 - $0.69 each
100 $0.49 each
Hard and Soft Spiles
To control the venting and carbonation level of cask-conditioned beer.
25 quantity - $0.38 each
50 quantity - $0.29 each
100 quantity - $0.21 each
Wooden Stillage for Holding Cask
$29.50
Cask Doctor Tap
Cask tap with built in non-return valve.
Assists beer engine on long beer line runs.
Available for L and 3/4" threads.
Very easy to take apart and clean.
$26.98
Gravity Dispense Tap
The best tap for serving cask ale by gravity.
Definitive on/off action.
$39.25
Single Cask Widge
Everything you will need to tap, vent and connect to your beer line to extract from a 9 to 11 US gallon cask
$90.00
Dual Cask Widge
As the single plus the equipment to enable you to tap, vent and condition another cask to be ready to go online
$115.00
Cask Widge Conditioning Kit
Everything you will need to tap, vent and condition a cask waiting to go on-line
$56.50
Cask Widge Cleaning Kit
Everything you will need to clean your Widge System
$18.95
Cask Widge Clarity Sampler
Essential for the auditing and tasting of your beer both prior to connection on-line and regular checking thereafter
$29.95
Race Cask Ventilator
The Race Cask Ventilator is a basically automatic hard and soft spile. After proper venting using wooden spiles and at the point of dispense, the Race Cask Ventilator should be inserted. By only permitting the ingress of air when beer is being dispensed the life of the beer in the cask is extended by a day or two plus it alleviates the need to hard spile at the end of the night. Reusable.
$17.95
Shive Extractor
Makes the removal of plastic or wooden shives and keystones simple.
$29.50
Check Valve
Stops beer running through the beer engine if there is pressure on the beer i.e. the firkin is higher than the beer engine or a flojet gas pump is used for long runs.
$67.75
Camra Guide to Cellarmanship
The definitive guide for handling cask ale. A must buy for burgeoning cellarmen or women.
$21.25
Venting Peg
Useful tool for venting very lively casks – helps eliminate the beer shower.
$42.25
Blue Tut and Clip Cork
Seals the cask after use.
Tuts - $0.50 each
Corks - $0.17 each
Pump Clip Blank
Adhere you beer label to the plague and attach to handle of beer engine.
$12.95
Stainless Steel Cask Tap
Stainless steel version of the cask tap for hooking up to a beer engine.
$155.00
Stainless Steel Gravity Tap
Stainless steel version of the gravity tap for direct dispense.
$160.00
