Home

    About UK Brewing

    Bungs & Spiles

    Casks

    Cask Cooling

    Cask Widge

    FAQ

    Glassware

    Handpumps and Parts

    Optics

    Sundries and Valves

    Taps, Nuts and Tails

    Tools & Venting

    Videos
    Andy Thornton Projects

    FOLLOW US ON:

       Facebook      Twitter




Join our mailing list!
Home > Tools & Venting
Sort By:
1
Race cask ventilator Cask Breather Spigot Shive Extractor Bar
Our Price: $17.95
Our Price: $18.45
Our Price: $29.50
Race cask ventilator Cask Breather Spigot Shive Extractor Bar
#11045 An automatic hard and soft spile that can be used AFTER the cask has been properly vented. Only allows air to enter the cask when beer is dispensed otherwise the cask is sealed. The advantage is that it alleviates the need for hard spiling at the end of a session and extends the life of the beer by another day or so. Will allow excess gas to escape if pressure builds. Reusable. #11072 Used with the cask breather to attach gas line to the firkin through the shive bung. Should be threaded in not hammered. #11090 Tool for removing shives from casks after use. Worth its weight in gold. Can also be used for keystones. Watch our "Tools of the Trade - Ash Mallet and Shive Extractor Bar" video to learn proper technique for this very useful tool.
Wooden Stillage Barrel Venting Peg Ash Mallet w/ heavy duty shaft
Our Price: $29.50
Our Price: $42.25
Our Price: $44.50
Wooden Stillage Barrel Venting Peg Ash Mallet w/ heavy duty shaft
#40090 Wooden Stillage suitable for firkins or pins. #11070 Used when the cask is particularly lively. Permits the initial venting by controlling escape of beer. #40010 Ash Mallet with heavy duty shaft. Much better than rubber for knocking in spiles and taps. Watch our "Tools of the Trade - Ash Mallet and Shive Extractor Bar" video to learn proper technique for the mallet.
Cask Breather Autotilt Stillage
Our Price: $75.50
Our Price: $212.50
Cask Breather Autotilt Stillage
#40030 Cask Breather
Utilised to extend the life of cask ale by replacing the head space with CO2 at atmospheric pressure. Just attach in line from your CO2 regulator which should be set at about 5 psi. The cask breather can be used for multiple casks.
NOTE: If dispensing a cask in the traditional way i.e. horizontally, you will require the cask breather spigot 11072. If using with the cask widge i.e. vertically. the spigot is not needed. 		Currently OUT OF STOCK. Next container arriving May 23rd.
#33050 Autotilt Stillage
All purpose autotilting stillage for use with cask sizes 9 to 11 gallons. Unique five coil springs for smooth lift every time. Lifetime mechanical warranty (which even covers the springs). The most versatile cask handling system available. 18 gallons (kilderkin) springs available. To see the autotilt in action click here.
   
 
1